User Support and IRAF Software

Welcome to iraf.net Thursday, May 02 2024 @ 06:45 PM GMT

Select a Forum » IRAFNet » General IRAF » Applications » Systems » Misc » Sources » Virtual Observatory » Python » Non-IRAF Software » Open Positions » Resumes » Sitemail Archives » Test

Forum Index > Help Desk > General IRAF

New Topic

First | Previous | 37 38 39 40 41 42 43 | Next | Last

Topic Subject   Views   Replies   Last Post   Case structures in IRAF scriptsStarted by:piverson, 04/24/2008 09:52PM Mike- Does SPP support case structures? If so, can you give me a simple example of the syntax? Thanks. -Paul   1835 1 By: fitz 04/24/2008 09:52PM cartesian to aitoff projectionStarted by:nowheydude, 04/03/2008 06:40PM I've got a fits image I'd like to convert from a Cartesian projection to an Aitoff... are there any tasks that will do this? Thanks   1990 1 By: fitz 04/03/2008 06:40PM Cant run iraf using cl commandStarted by:newirafuser3, 01/12/2011 03:30AM Hi, I´m very new to iraf and Ive just about managed to install it, but when I type ´cl´ on the xgterm terminal I get the following: ¨cl-launch.sh 2.32 --shell wrapper generator for Common Lisp soft´ For help........ Thats about it, iraf simply ...   2578 3 By: newirafuser3 01/12/2011 03:30AM Cannot run epar setinstrument and oth...Started by:orionist, 02/25/2017 08:05AM I just install IRAF using mkiraf. when I tried to run epar setinstrument, I got the error ERROR: task `setinstrument' not found called as: `eparam (setinstrument)' and the same as epar with other command like epar ccdproc, epar zerocombi...   1961 3 By: fitz 02/27/2017 09:17PM Cannot open imageStarted by:Houdebine, 07/13/2008 06:25AM I have a problem with plotting a 1d spectrum. All the files are in my directory, but when I try to plot I get: on> splot extra039 ERROR: Cannot open image (extra039) Can someone let me know why iraf cannot find my files ?   16130 12 By: epud 07/13/2008 06:25AM Cannot open file error?Started by:Jason Quinn, 11/09/2007 08:53PM It's funny I was just getting the opposite error to the previous post. I was trying to convert fits files to imh files and was getting "Warning: cannot open pixel file"... turned out that the sub-directory in the imdirs didn't exist. This seems to have...   2911 1 By: fitz 11/09/2007 08:53PM Cannot open file (tmp$xxx)Started by:sarah.sweet, 07/02/2010 01:56AM Hello, I have been successfully using iraf to reduce some data, including msctvmark to overlay a catalogue on an image. Today when I attempt to use msctvmark I receive the following message: Warning: Cannot open file (tmp$iraf4133h) ERROR on line 186...   2427 2 By: sarah.sweet 07/02/2010 01:56AM Cannot install executables for mscredStarted by:stevenson, 11/03/2009 01:19AM Me again. I thought mscred was working but when I try to use any of the tasks (mscimage, for example) I get the error message: ERROR: Cannot open connected subprocess (./x_mscred.e) "type="image")" line 27: mscsrc$mscimage.cl called as: `m...   2796 2 By: stevenson 11/03/2009 01:19AM Cannot get local task to be loaded at...Started by:lpetras, 04/21/2009 01:19PM I have a simple question. If I define a local task and put it into the loginuser.cl file, I don't see it in the main menu when IRAF prints the login screen, yet if I define the task directly at the ECL> it appears to load and I can see it at the main...   1889 2 By: lpetras 04/21/2009 01:19PM Cannot close file error?Started by:piverson, 11/05/2007 09:32PM I received the following error. ERROR: Cannot close file (flatR-66612cb.fits) "rfits (s1,"","flatR-"//n)" called as: 'ap_rfits_v_1 ()' I have run this script many times without any problems. I don't even know where this flatR-66612cb.fits is...   2867 2 By: piverson 11/05/2007 09:32PM can't start xgtermStarted by:duvall, 12/01/2018 12:19PM I upgraded my macbook air to mojave 10.14.1. When I try to start up xgterm, I get the message dyld: Library not loaded: /usr/X11R6/lib/libXpm.4.dylib Referenced from: /Users/duvall/.iraf/bin/xgterm Reason: image not found Help! Thanks. ...   1540 2 By: duvall 12/11/2018 09:29AM Can't open files on mounted disksStarted by:dagorym, 06/03/2016 11:28PM I have a computer that has 3 drives in it. The first contains the operating system and all it's associated directories. The second two are mounted as data drives off the root (/) directory. Iraf works just fine on files on the system drive but when...   1128 3 By: fitz 06/04/2016 12:20AM can't make ps plotsStarted by:Guest, 08/08/2006 06:42PM Dear IRAF gurus, one of my IRAF installations can't send plots to the printer or even create plots using the colon command :.snap epsf (this creates and empty file like sgi80923.eps) I can use lp or lpr to send files to the printer from the UNIX comman...   9087 7 By: kkwitter 08/08/2006 06:42PM Can't install 32-bit iraf on 64-bit MacStarted by:massey, 06/14/2012 11:56PM Hi, Mike--- I think I encountered this problem before and you figured out what was causing it (but there was no workaround at the time). I'm still having problems with "ellipse" and other stsdas when I go to plot or interact with the display. I decid...   2191 3 By: fitz 06/14/2012 11:56PM Can't find what's blocking port 5137Started by:jturner, 01/07/2009 05:00PM When I start either an ximtool or DS9 on one particular shared machine, I am getting the message that port 5137 is already in use. Attempting to display to that port in IRAF just hangs without returning to the prompt. However, I can't actually [i:58bfbf...   2081 1 By: jturner 01/07/2009 05:00PM Can't add headers to file using heditStarted by:e.longstaff, 09/10/2018 05:43PM When I type this, imutil> hedit myfile.fits CUNIT1="Angstrom" add+ addonly+ I get this error, ERROR: parameter `CUNIT1' not found I've so far got around it by epar hedit and setting add and addonly to yes but this isn't a permanent solution....   879 1 By: fitz 09/10/2018 06:07PM Can you automate an imexam task?Started by:sscibell, 09/06/2015 08:07PM Hello, Is it possible to automate a cursor command in imexam so it can be incorporated into a script? It seems that you can do this if you give image x and y positions and then the key stroke. However, I am trying to determine the y-location of a...   1025 1 By: fitz 09/10/2015 04:23PM Can STSDAS and TABLES work on ubuntu?Started by:Quietskies, 07/19/2007 02:06PM Hi There's a problem again...... My IRAF work well on Ubuntu except for the STSDAS and TABLES package， I download these packages and try to install them, but when I use them, they say can't open *.e files and I find there's no *.e files at all ...   7018 6 By: Quietskies 07/19/2007 02:06PM Can someone running iraf on a Sun hel...Started by:Houdebine, 07/23/2008 06:40AM I created some iraf files on a Sun station some years ago. I can't read them on my PC anymore. Unfortunately I don't have access to a sun station anymore. Could someone working on a sun station help me ? Regards Eric   4083 8 By: Houdebine 07/23/2008 06:40AM Can not print from implot window.Started by:nlo, 06/06/2007 02:05PM Hi When I try the print command in Implot window I get this error. [color=red:094d0f1acd][i:094d0f1acd]"Fatal (sgidispatch): unable to access SGI translator `sgi2uapl.e' lpr: Error - stdin is empty, so no job has been sent."[/i:094d0f1acd][/color:094d0...   2944 1 By: fitz 06/06/2007 02:05PM Can not open alpha_lyr_stis_008.fitsStarted by:pjpessi, 07/17/2019 07:09PM Hi, I apologise in advance if this is a silly question. I downloaded the file "alpha_lyr_stis_008.fits" from https://aeon.stsci.edu/ssb/trac/astrolib/browser/trunk/pysynphot/data/generic/alpha_lyr_stis_008.fits?rev=4677 I want to see the spectra on s...   1714 2 By: pjpessi 08/29/2019 01:45PM canStarted by:giannicatanzaro, 05/07/2019 07:22AM hi all I cannot read with iraf FTS files download from AAT archive, even if I rename them in .fits. Typical error I get is ecl> splot RUN0002.fits ERROR: MWCS: dimension mismatch (mw_open) or when I use imheader ecl> imheader RUN0002 RUN0002...   981 0 By: giannicatanzaro 05/07/2019 07:22AM CanStarted by:massey, 03/09/2019 10:45PM Hi Mike et al--- I've come across about dozen ancient IRAF images (IIDS data) that are still in the "imh" and "pixels" form. The weird thing is that although I can see them find with an ls, imhead says it can't open the file. I could understand it ...   841 1 By: fitz 03/11/2019 02:10AM calulate...Started by:acard, 06/20/2007 08:14PM Hi, do someone know if, and how, we can make basic operation like sum, division and so on, simply with numbers? Like a calculator, ex (4861/5000 -1)*299793   2586 1 By: fitz 06/20/2007 08:14PM Calling IRAF/STSDAS routinesStarted by:raa, 04/03/2006 08:58AM Hi, Is it possible to call IRAF/STSDAS routines from the shell prompt in linux without going through the cl prompt? with regards Raa   3855 1 By: fitz 04/03/2006 08:58AM calling an iraf routine from cStarted by:dbrenner, 07/23/2008 01:59PM Can it be done? How? Thanks.   2044 2 By: dbrenner 07/23/2008 01:59PM calling a cl command from within a C-...Started by:RhEvans41, 05/28/2008 06:05PM I have a shell script which creates a file which I then try to get IRAF to execute. The script used to work fine, but I have not used it in over 12 months and now I find it does not work. I am running Version 2.14 on a Mac. The relevant part of the scr...   6630 1 By: fitz 05/28/2008 06:05PM calculating gain and readnoise of coa...Started by:AndrewS, 05/07/2011 07:31PM below is the parameters I used for imcombine for coadding frames of m13 cluster: imcombine ("@m13-5.txt//bfreg", "m13-5.fits", headers="", bpmasks="", rejmasks="", nrejmasks="", expmasks="", sigmas="", imcmb="$I", logfile="STDOUT", combine="average", r...   1813 1 By: kwrsema 05/07/2011 07:31PM C code in procedure scriptStarted by:jacom, 07/22/2011 08:56AM Hi, I am using IRAF V2.14 I have a C language code coordtransform.c which I want to include in a procedure script. I have defined it as a foreign task by task coordtransform = $coordtransform.c In IRAF it works fine if I do the normal !coordtransfor...   1704 2 By: jacom 07/22/2011 08:56AM Byte-swapped tableStarted by:Guest, 03/05/2010 04:13AM Hi, I’m revisiting some older data (circa 2006; see attachment) and when I try to TPRINT the tables, I get the following message:             Warning: Table `n473Ha' does not exist or cannot be opened. When I recreate the table ...   1662 1 By: fitz 03/05/2010 04:13AM

First | Previous | 37 38 39 40 41 42 43 | Next | Last

Normal Topic Sticky Topic Locked Topic New Post Sticky Topic W/ New Post Locked Topic W/ New Post

View Anonymous Posts  Anonymous users can post  Filtered HTML Allowed  Censored Content

dog allergies remedies cialis 20 mg chilblain remedies

•  Copyright © 2024 iraf.net
   All trademarks and copyrights on this page are owned by their respective owners.

• Powered by Geeklog
• Created this page in 0.32 seconds