iraf.net

Welcome to iraf.net Friday, April 26 2024 @ 10:08 AM GMT

Forum Index > Help Desk > Applications

New Topic

First | Previous | 2 3 4 5 6 7 8 | Next | Last

Topic Subject

Views

Replies

Last Post

ds9 'illegal instruction: 4'Started by:mstribitaka, 09/19/2014 03:17PM
ds9 suddenly stopped opening for me, it
was coming up with some 'conflict'
error. So I decided to re-install both
IRAF and ds9 to see if that fixed the
problem. It didn't.

When I type 'ds9' at an xgterm prompt
(via X11) it says:
'Illegal instru...

1509

By: mstribitaka

01/23/2015 05:39PM

fconvolveStarted by:anestis_tziam, 01/21/2015 02:01PM

I have created a 2nd order psf in
daophot. When i do imhead on the psf
file i get the following:
4U1543-624_36_sh.fits.psf.1.fits[30,30,6][real]:
PSF for image: 4U1543-624_36_sh.fits

I want to use this psf image on the
fconvolve task. I trie...

1622

By: fitz

01/21/2015 04:52PM

MSCIMAGE problemStarted by:fitz, 12/15/2014 04:12PM
[color=red][Moderator's Note: Forwarded
from story submission[/color]

I have a mscimage problem:

mscred> show version
NOAO/IRAF V2.16.1
mscred> unlearn mscimage
mscred> ls tmp*
ls: cannot access tmp*: No such file or
directory
mscred> mscima...

2240

By: tapio

01/20/2015 03:22PM

XGterm problem with implot Ureka -- O...Started by:fitz, 01/17/2015 08:10PM

[color=red][Moderator's Note:
Forwarded from story
submission][/color]

I installed Yosemite which messed with
my original IRAF install so I installed
Ureka and it's working okay but I can't
use implot or imexam - instead, the
terminal poops out...

1960

By: fitz

01/17/2015 08:14PM

how to use adumpcatStarted by:jcadien1, 01/06/2015 02:55AM
I have iraf installed on my home
computer. I want to use adumpcat to get
sections of astrometric catalog for use
in finding coords of stars on
images.(very large images). I have tried
it but could not connect to online
catalogs. For example, the output ...

1355

By: fitz

01/13/2015 04:05AM

interactive option refuses to work in...Started by:buckleygeer, 12/16/2014 10:07PM
Hi, I have this bizarre problem that the
interactive=yes option on reidentify has
ceased to function. It was working fine
and now it just ignores it and doesn't
give me the option of examining the
solution. I have the ureka 1.4.1
installed on a MacBookP...

1735

By: buckleygeer

12/19/2014 09:33PM

imstat algorithm: sigma clippingStarted by:KevinVolk, 12/19/2014 06:37PM
I routinely use imstat to get statistics
on images. One of the more useful
aspects of imstat is the ability to do
the sigma clipping and remove deviant
pixels. I use it a lot to look at
detector characterization data and get
the mean/standard deviatio...

1824

By: fitz

12/19/2014 06:47PM

Possible to set rimexam radius value ...Started by:psymon104d, 12/17/2014 02:11PM
I am analysing faint X-ray sources from
Chandra data using imexamine and
specifying the aperture radius from
within the rimexam parameters.

>epar rimexam

I have coordinates for all my sources
and I have the corrected aperture radii.
I need a spec...

1185

By: psymon104d

12/18/2014 04:24PM

Error: task cosmicrays not foundStarted by:unixil_astro, 12/17/2014 02:54AM
hi, i have a problem in running
cosmicrays task, when i run "spa
cosmicrays", it says task "cosmicrays"
not found, and under ccdred i can't find
cosmicrays indeed.

should i run something like make latest
or things like that to fix the problem,
or i ...

1855

By: unixil_astro

12/17/2014 03:02AM

Constant value substitution for pixelsStarted by:sa14722, 12/11/2014 07:21PM
I'm new to iraf so please pardon me if
this is perhaps a silly question.

So I have an image which has a diagonal
region of bad pixels. I have created a
text file which contains a list of the x
and y positions of all these bad pixels.
I am trying to r...

1841

By: sa14722

12/12/2014 03:12PM

Standard Star CalibrationStarted by:fitz, 11/25/2014 07:29AM

[color=red][Moderator's Note: Forwarded
on behalf of user][/color]

After weeks of intensive research I
finally managed to obtain a CMD of the
globular cluster M53 using B,V filters.
(See Attachment)
The magnitudes here are of course the
instrumen...

3071

By: fitz

11/25/2014 07:30AM

nfit1d errorStarted by:donzelli, 11/25/2014 01:53AM
Hi, when I try to fit data in a table
using 'users' function I receive this
message: ERROR: Error in variable name.
I've done all I know, i.e.
unlearn the task, parameters, etc. The
task works fine with 'galprof' or
whatever function. You can see below...

1031

By: fitz

11/25/2014 02:51AM

Persistent sky lines when extracting ...Started by:cwbullivant, 10/18/2014 07:14AM
For the last few months I've been
working with spectra taken at the Bok
telescope at KPNO, and one particular
data set has been especially difficult
to reduce properly. The spectra for this
night are generally fainter than the
rest of the data that I've...

1739

By: cwbullivant

10/18/2014 07:14AM

Reducing OSIRIS/GTC data with irafStarted by:jadiazt, 10/01/2014 12:48AM
Hello,

I want to reduce OSIRIS/GTC data using
standard routines of IRAF. OSIRIS images
are composed of 3 layers, where the
first is the header and the reamaining
are the CCDs data. When I want to apply
ccdproc to the images, for example
images=image[...

1931

By: jadiazt

10/16/2014 11:38PM

merging Started by:giannicatanzaro, 10/16/2014 09:58AM
dear all

I have this question: how do I can merge
all the orders of an echelle spectrum in
a single spectrum?

thanks

Gianni

681

By: fitz

10/16/2014 10:46PM

Extracting lambda-flux values of fitt...Started by:Francesca, 10/15/2014 11:55AM
Hi,

I am fitting some spectral lines with
the deblend option in the splot iraf
task. Once the fit has been done, I
would like to save, together with the
fit parameters (e.g. FWHM,flux, etc,
which I get in the splot.log file), also
the "wavelength-flu...

800

By: Francesca

10/15/2014 11:55AM

splot deblending vs fitprofs Started by:chewbacca, 10/06/2014 07:29PM
Hi,

I am measuring broad spectral lines in
iraf, and the problem is that the
measurements with deblending in splot
and fitprofs do not match. I use the
same file as the input, and set the
sigma0 and invgain parameters to the
same value in both measu...

783

By: chewbacca

10/06/2014 07:29PM

Problems running ngaussfitStarted by:Francesca, 10/01/2014 01:37PM
Hi,

I am trying to run the task ngaussfit on
my mac osx 10.8.5 but it seems not to
work. After I launch the task,
I can see the the spectrum on the
graphic window (together with a
tentative fit below).
However, if I try to change the graph
window ...

1311

By: fitz

10/06/2014 02:55PM

what are the general tasks like sextr...Started by:haha, 09/30/2014 12:51PM
I mean tasks in iraf.

859

By: haha

10/04/2014 01:34PM

Imlintran: segmentation violation Started by:Lena, 09/19/2014 02:33PM
Dear colleagues,

please, help me to solve this problem. I
can upload sample files anywhere you
like is you need them.

[b]SYSTEM:[/b] x86_64 GNU/Linux
Xubuntu 14.04
[b]IRAF:[/b] PC-IRAF Revision
2.16.1
[b]BUG:[/b] Imlintran ᥿...

1118

By: fitz

09/22/2014 04:27PM

dispcorStarted by:adnan, 09/02/2014 11:02AM
Hi,
I'm having problem using the 'dispcor'
function on iraf.
I have installed the latest ximtool and
iraf version on a 64-bit Linux OS.

When I type 'dispcor' in an xgterm
window, it asks me give the Input and
Output spectra list. When I enter both
...

1246

By: adnan

09/15/2014 04:00PM

about the flux calibration of a spectrumStarted by:haha, 09/04/2014 03:49AM
when we run
apall

Automatically there is a size for an
aperture. That size is the FWHM or
something of the aperture? Or we can
choose the size of the aperture by
ourself?

If we choose by hand, the flux may
become arbitrary?

929

By: haha

09/04/2014 03:49AM

an iraf script problemStarted by:haha, 08/29/2014 09:25AM
How to write a wspectext script in
bash?
It is like:
$wspectext spectra.fits spectext

So there are two parameters now.

images
imutil
noao
onedspec
unlearn wspectext
wspectext.wformat="%0.2f"
printf ("wspectext ('%s', input='%s',
header...

2270

By: haha

09/01/2014 12:18PM

how to dump the data of a spectrum go...Started by:haha, 08/26/2014 02:59PM
There is only one extension for a
spectrum fits file got by iraf.
However there are four parts including
primary, background...

Splot can display the spectrum with
wavelength and flux.

I tried to read the data of the spectral
fits file, but only ...

968

By: haha

08/29/2014 09:13AM

scopy: wavelength range problemStarted by:chewbacca, 08/27/2014 07:51PM
I am using scopy to copy portion of a
spectra with starting and ending
wavelengths w1 and w2. The rebin
parameter is set to yes, so I would
expect w1 and w2 to be exact (the
spectra covers a region well beyond w1
and w2).

However, in some cases scop...

677

By: chewbacca

08/27/2014 07:51PM

which step lets iraf know the exposur...Started by:haha, 08/24/2014 12:09PM
For specral reduction,there is a
parameter 'exptime' in 'calibrate'. The
exptime is the exposure time of your
star or the standard star?

How does iraf know the exposure time of
your source and the standard star?

1402

By: haha

08/26/2014 02:48PM

noao.onedspec.hirescalStarted by:ircarrascal, 08/22/2014 04:50PM
I thought this task would be included in
v2.16, which I just installed, but I
can't actually find it. See Sect. 5
here:

ftp://iraf.noao.edu/iraf/v216/v216revs.txt

Any idea what's going on or how I can
get it to work?

Thanks!

Ivan

572

By: fitz

08/22/2014 07:46PM

scombine with local snr weightStarted by:chewbacca, 08/17/2014 11:50AM
Is there a way to use scombine with the
weights in the overlap regions being the
local snr (signal to noise ratio)?

This is a fairly standard use and it
seems scombine doesn't support it...
what is the easiest way to do this in
iraf? I have a fairly ...

741

By: chewbacca

08/17/2014 11:50AM

rvsao MWCS errorStarted by:fitz, 05/28/2014 08:04PM

[color=red][Moderator's Note: Forwarded
from story posting][/color]

Hello,

I installed on a MAC (OS X 10.8.5) the
latest IRAF version (2.16.1) and the
rvsao 2.8 as external package with the
make rvsao in the extern directory.
When I try to run...

1609

By: fitz

08/16/2014 05:11AM

rvsao 2.8.1 problem in Mac OS XStarted by:chewbacca, 08/05/2014 01:06AM
I have the newest iraf 2.16.1 in Mac OS
X and rvsao 2.8.1 (installed through
'make rvsao' in /extern local folder).

When I run the command xcsao, I get the
error

ERROR: MWCS: coordinate system not
defined (logical)

Both the input spectrum and ...

1481

By: chewbacca

08/16/2014 12:10AM

First | Previous | 2 3 4 5 6 7 8 | Next | Last

	Normal Topic
	Sticky Topic
	Locked Topic

	New Post
	Sticky Topic W/ New Post
	Locked Topic W/ New Post

View Anonymous Posts

Anonymous users can post

Filtered HTML Allowed

Censored Content

dog allergies remedies cialis 20 mg chilblain remedies

Search

Forum Menu

User Functions

Topics