iraf.net

Welcome to iraf.net Monday, May 20 2024 @ 07:48 AM GMT

Forum Index > Help Desk > Systems

New Topic

First | Previous | 1 2 3 4 5 6 7 | Next | Last

Topic Subject

Views

Replies

Last Post

Variable DeclarationsStarted by:mainiacjoe, 06/04/2007 08:25PM
I am new to writing IRAF scripts and
have three questions about variable
declarations:

The first is fairly general: In
procedure scripts, when should you put
variable declarations before the
[i:7548ffb82b]begin[/i:7548ffb82b] and
when in the body of t...

7854

By: fitz

06/04/2007 08:25PM

problems declaring image dataStarted by:dan, 02/27/2006 01:33PM
Hi,

I'm having a problem re-creating a
declaration in "A User's Introduction to
the IRAF Command Language". Section 6.5
has the following

cl> real image rarray[50,50] {min=0,
max=100}

And I get the following response

** Syntax error
**: real imag...

7836

By: fitz

02/27/2006 01:33PM

gmisc, nmisc intallation in ubuntu 10.04Started by:sebastian, 12/21/2011 08:00PM
Hello there. I was installing gemini
package in ubuntu 10.04 and I managed to
install it. The problem is that other
external packages, such as gmisc and
nmisc were not. This could be seen when
running gprepare
gmos> gprepar image
ERROR: Cannot open c...

7818

By: sebastian

12/21/2011 08:00PM

how to make IRAF + XIRAF run on Linux...Started by:Guest, 02/15/2006 02:56PM
Hello,
We would like to use IRAF + XIRAF and
stsdas on Linux DEBIAN.
we cheked the site http://iraf.noao.edu/

And it seems that we must try to compile
from the source, since the only
distro is RedHat.
Do you know if this is possible to do
this on deb...

7751

By: rubab

02/15/2006 02:56PM

Mkiraf: Command not foundStarted by:bxm6574, 07/11/2016 08:24PM
I have the run the installation process,
according to
[url]http://vivaldi.ll.iac.es/sieinvens/siepedia/pmwiki.php?n=HOWTOs.IrafMacOSX[/url].
Then, while in the directory (I have
also tried it outside) I type mkiraf,
and I get command not found error. F...

7706

By: bxm6574

07/12/2016 02:15PM

Help - Mac OSXStarted by:adamclarke, 12/08/2010 05:17PM
Hey

I'm trying to install IRAF on my Macbook
running Snow Leopard. I downloaded the
64bit tar file from iraf's website, set
up an iraf user as told, and set
terminal to run in csh

When I install i get the following:

[code:1:e6fa1b12fa][ajclarke&#...

7514

By: fitz

12/08/2010 05:17PM

Cygwin CL fatal error.Started by:Achernar, 10/25/2009 08:06PM
Aloha folks!

I've recently installed IRAf on Cygwin
following the instructions laid out by
IAC (used by others on the forums) and I
have encountered an error upon starting
IRAF.
Xgterm and DS9 start fine but upon
issuing the ecl command I get the
error...

7440

By: fitz

10/25/2009 08:06PM

V2.12.1 IRAF and suse 10.3Started by:shsaeed, 10/13/2008 01:59PM
I install IRAF and the massage show that
the iraf install corectly
But when I type mkiraf tell command not
found.
What’s the problem?

thanks

7383

By: zbjiang

10/13/2008 01:59PM

IRAF is REALLY Slow on Kubuntu 7.04Started by:cptsteiny, 06/03/2007 03:29AM
First, I installed IRAF via the
instructions laid out by Michael
Hutchinson at
http://mjhutchinson.com/journal/2006-11-05/install_iraf_on_ubuntu_edgy_amd64

When I run IRAF and try to do any sort
of task, IRAF takes literally at least
10 minutes to fini...

7348

By: cptsteiny

06/03/2007 03:29AM

problem in clStarted by:naz, 03/19/2008 04:02AM
Hi all,
I'm trying to install the 2.14 iraf on
fedora8.Everything is ok during the iraf
installation, but this error message
appears when I executing the cl
command.the message was:
/[i:48d027f227]home/iraf/iraf/bin.redhat/ecl.e:error
while loading shar...

7313

By: yuanjinghua880

03/19/2008 04:02AM

Undefined symbols referenced from fit...Started by:bpritzl, 05/21/2009 01:23PM
I am trying to compile the stand-alone
version of DAOPHOT II and associated
programs from Dr. Peter Stetson on my
MacBook Pro running OS X version 10.5.7
with an Intel processor. When I run
'make', I get the following errors
(below is listed only a sam...

7090

By: fitz

05/21/2009 01:23PM

suse 9.3 and tables/stsdasStarted by:Guest, 02/24/2006 07:38PM
Hello,

I am trying to install some external
packages in IRAF in my laptop that has
suse 9.3. I will write in detail the
steps I am taking hoping that someone
can help me out with the problems I am
facing.

First I make a directory 'tables' under
/iraf/...

7077

By: fitz

02/24/2006 07:38PM

IRAF install using Cygwin - Stuck at ...Started by:Tim-H, 04/17/2015 10:18PM
Hi all,

I'm installing IRAF under Cygwin using
the following guide
http://www.iac.es/sieinvens/siepedia/pmwiki.php?n=HOWTOs.IrafCygwin

After getting stuck on 'mkiraf' for a
while I finally got it to work. Now the
issue seems to be Xgterm. When i ...

6907

By: Tim-H

04/28/2015 10:04PM

ximtool problem on Intel MacStarted by:massey, 08/30/2007 12:30AM
Mike, et al---

I just recently started using an Intel
Mac. I am having problems though
when I go to an imt8192. I did a fresh
install of ximtool, and the
problem persists. Heres's what happens.

1) When I first fire up ximtool-alt I
get the followi...

6901

By: massey

08/30/2007 12:30AM

Installing IRAF on Windows VistaStarted by:Guest, 01/28/2009 10:25PM
Hello,
I am trying to install IRAF on my
Windows Vista PC. I have already
installed DS9, but I was looking at the
FAQs for IRAF and I can't seem to find
if there is a way to successfully
install it on my computer. If you can,
please let me know ...

6899

By: afarrow

01/28/2009 10:25PM

Snow Leopard (OSX 10.6) anyone?Started by:azangari, 09/10/2009 02:42AM
Has anyone made the switch to OSX 10.6
yet? I suspect that my computer is
plagued by some memory issues that 10.6
is purported to fix and am eager to
upgrade (for once). I know the original
Leopard has some X11 issues, so I asked
my university's IT de...

6843

By: gcardonav

09/10/2009 02:42AM

cl failed on MacOSX 10.6 (intel)Started by:jchiar, 11/23/2010 09:11PM
Hello,

I've successfully installed IRAF 2.15 on
my Mac running 10.6 (Snow Leopard). The
installation mostly went well except
that I had to create two symbolic links:

/iraf/iraf/bin.macosx -> bin.macintel

I ran mkiraf from my home dir and
created ...

6820

By: fitz

11/23/2010 09:11PM

cannot open connected subprocess (./x...Started by:mroniedz, 06/12/2009 10:43AM
Dear Sir,

I have been quite extensively using
Cygwin/Iraf on Windows Vista. Recently I
decided to add stsdas, so I have
installed tables and stsdas. Almost all
works, help, epar, some tasks like
'bmodel' etc., excep that when I start
task like 'isoexa...

6753

By: fitz

06/12/2009 10:43AM

foreach: No matchStarted by:phntmII, 04/25/2011 02:09AM
Hey All,

I had another machine go down so have
upgraded it to Fedora14 (32-bit) and
have been trying to install Iraf v215.1
for the past week, but keep getting the
following when I run a test install:

==================================================...

6698

By: etakarina1

04/25/2011 02:09AM

Problem Installing Iraf on UbuntuStarted by:biledemon, 03/07/2007 02:50PM
Apologies for being a leech (asking for
help without contributing) but I'm under
some pressure to complete a 4th year
project and was wondering could I get
some help here? Or at least be pointed
in the right direction?

I've installed Iraf into the scis...

6632

By: rubab

03/07/2007 02:50PM

IRAF on new laptopsStarted by:jb, 01/12/2006 03:37AM
Does anyone know if the MAC version of
IRAF would work on the new MAC
intel-based MacBook ? Alternatively
would the LINUX IRAF version be more
compatible?

6623

By: sirmarcos

01/12/2006 03:37AM

xgterm: no available ptysStarted by:Guest, 03/30/2007 12:53AM
Hello Iraf!
I have found this problem when try to
launch xgterm (1.3.1-bin.lnux) on
my Slackware 11.0 with 2.6.20.4 kernel.
In the kernel config file I have enebled
those options which you recomended:
"Until now the only solution was to
rebuild the ker...

6603

By: tomasz

03/30/2007 12:53AM

Issue with Iraf module in Pyraf (imst...Started by:akerfeldt, 02/15/2018 05:03PM
I'm trying to use the iraf module in
pyraf. I'm launching this from my conda
environment where I have iraf and pyraf
installed. I'm running this in bash on
ubuntu. I get the following error
message when I try to run iraf.imstat on
a file:

>>> iraf.im...

6600

By: olebole

02/16/2018 07:33AM

external package configure failsStarted by:mjdrin, 07/19/2011 07:19AM
I just installed IRAF V2.15.1a on a
MacBook Pro running OS 10.6.8. The
install seems to have worked (although I
had to force the architecture:
"./install -m macintel" as it insisted
on looking for macosx).

Sadly the external package configure
script ca...

6599

By: delta_kuadrant

07/19/2011 07:19AM

Problem installing Tables under Fedora 9Started by:thr3shold, 12/09/2008 08:19AM
I am trying to install Tables under
Fedora 9. I got IRAF running OK using
http://student.dcu.ie/~reynols7/iraf.html
When I tried installing the tables
package following the directions in
http://stsdas.stsci.edu/download/stsdas_3.9/stsdas_install_guide_...

6465

By: fitz

12/09/2008 08:19AM

one more on 'mkpkg -p nmisc...'Started by:paulartcoelho, 09/28/2006 05:17AM
hi there, i'm trying to compile some
packages under suse 10.1.

when i get to nmisc, i get:

softools> mkpkg -p nmisc
Library libpkg.a is up to date
Object x_imexam.o is up to date
xc -Nz -p nmisc x_imexam.o libpkg.a -lds
-lncar -lgks -lllsq -lxtool...

6449

By: paulartcoelho

09/28/2006 05:17AM

Gemini v1.9.1Started by:westra, 01/17/2007 08:34AM
From www.gemini.edu I noticed that there
is a new version of the Gemini package.
Since I just did an entire install of
v2.13b2, I would like to install it.
Normally, no problem,
[b:b06e6efb21]*BUT*[/b:b06e6efb21]
Gemini warns not to use v2.13b2. I live
...

6441

By: westra

01/17/2007 08:34AM

multiple-extension FITS file formatStarted by:Guest, 02/20/2006 02:54PM
Dear IRAF folks,

I have a relatively simple question:

I'm reducing some HIRES/Keck data that
comes in multiple-extension FITS
file format. When I use RFITS to
separate the three extensions,
corresponding to the three chips of the
detector, the compl...

6428

By:

02/20/2006 02:54PM

ERROR: No /iraf/iraf//bin.linux64/voc...Started by:ddayjuno, 09/01/2016 12:37PM
I have downloaded and installed iraf
according to the instructions here:
http://www.astronomy.ohio-state.edu/~khan/iraf/iraf_step_by_step_installation

It seems to have installed fine - didn't
show any errors during installation and
d9&xgterm are ...

6379

By: ddayjuno

09/01/2016 05:26PM

compiling ECLStarted by:sirmarcos, 12/07/2006 05:44PM
Hello,

I have the ecl installed with the
installer fine on my MacOS X ibook. I
was trying to build it for personal
install on a suse system that I have
little admin control over and thus was
trying to follow the instructions here:

http://iraf.noao.ed...

6324

By: fitz

12/07/2006 05:44PM

First | Previous | 1 2 3 4 5 6 7 | Next | Last

	Normal Topic
	Sticky Topic
	Locked Topic

	New Post
	Sticky Topic W/ New Post
	Locked Topic W/ New Post

View Anonymous Posts

Anonymous users can post

Filtered HTML Allowed

Censored Content

dog allergies remedies cialis 20 mg chilblain remedies

Search

Forum Menu

User Functions

Topics