Welcome to iraf.net Tuesday, May 07 2024 @ 01:35 AM GMT
Jason Quinn |
05/24/2010 11:53PM (Read 2021 times)
|
|
|
Status: offline
Registered: 04/07/2006
Posts: 175
|
I got the following error while trying the install script for 2.15[quote:5f7eaf337f] Tapecap Device File Config
-------------------------- By default IRAF will search for a dev$tapecap.<node> file (where
<node> is the system name) when looking for a tape configuration file.
Platforms such as PC-IRAF and Sun/IRAF support multiple OS versions
and so the proper template file must be used. This configuration will
allow you to setup a default tapecap for this system, it may be skipped
if this machine has no tape drive attached.Create a default tapecap file? (yes):
Creating default file 'tapecap.aries' from tapecap.linux...
In the event a dev$tapecap.<node> file is not found on this
system IRAF will fallback to use just dev$tapecap. In cases where
the node name changes, this installation is shared with another
machine or in a local network, or any case where a tapecap.<node>
is not found, the dev$tapecap file will be the default tapecap used
for all IRAF systems.Do you wish to create a default dev$tapecap link? (yes):
Tapecap symlink 'tapecap' exists and is ok.
------------------------------------------------------------------------foreach: No match.[/quote:5f7eaf337f]My shell is tcsh. This is attempting a clean install.Jason
|
|
|
|
fitz |
05/24/2010 11:53PM
|
|
|
Status: offline
Registered: 09/30/2005
Posts: 4040
|
Hi Jason,This was found recently and a patched install script is available athttps://iraf.net/ftp/pub/installThe problem is caused by a missing 'tapecap.linux64' link/file in the iraf$dev directory. If you still have problems let me know.Cheers,
-Mike
|
|
|
|
Jason Quinn |
05/24/2010 11:53PM
|
|
|
Status: offline
Registered: 04/07/2006
Posts: 175
|
[quote:fb1c2f205a="fitz"]Hi Jason,This was found recently and a patched install script is available athttps://iraf.net/ftp/pub/installThe problem is caused by a missing 'tapecap.linux64' link/file in the iraf$dev directory. If you still have problems let me know.Cheers,
-Mike[/quote:fb1c2f205a]Thanks. I just re-ran the script without the post-config stuff. So far things appear to be working.The simplified install will benefit IRAF a lot. I am looking forward to the release version.Jason
|
|
|
|
| |
|
Content generated in: 0.10 seconds |
|