Status: offline
Registered: 02/24/2006
Posts: 2
|
Hello,
I was hoping someone could help me with my tfinder problems. I have installed tfinder and tables.. everything seemed to go smoothly during that process. However, now I'm at the point where I'd like to try to get a plate solutiong and the tfinder task is giving the following error message:Searching the Guide Star Catalog index...Reading the Guide Star Catalog regions:
/iraf/extern/gsc/s0000/4949.gsc
ERROR on line 272: Parameter not a legal character constant (datatype)
tfinder ()I have downloaded the GSC_ACT catalogue, and the path reported above is the correct location of the GSC file. The copy of the GSC_ACT that I downloaded was encoded in a binary format which needed to be decoded. Perhaps I did something wrong there? I did compile and run the decoder that came with the GSC_ACT catalogue. There are 2 formats it can decode to, I tried both of them on the file that iraf is telling me that it is reading from (4949.GSC) with no luck, so I'm not so sure that it's the catalogue data format that is the issue. I'm a newbie in IRAF, so I have a feeling I'm missing something basic. Any pointers would be appreciated, and any other information you would need I will be happy to collect and post.Thanks!Josh
|
Status: offline
Registered: 02/24/2006
Posts: 2
|
Hello Rob,
I'm running under Mac OS X 10.1.5. IRAF version is 2.12.1-EXPORT. Tables version is 3.2.Results of lpar tfinder:
image = "n1.0066.fits" Image name
(rootname = "") Alternate root name for output files
(objects = "") List of program object X,Y coords\n
(scale = 0.6) Plate or image scale ("/pixel)
(north = "top") Direction of North in the field
(east = "left") Direction of East in the field\n
(ra = INDEF) RA of the reference point (hours)
(dec = INDEF) Dec of the reference point (degrees)
(equinox = INDEF) Reference coordinate equinox\n
(xref = INDEF) X coordinate of the reference point
(yref = INDEF) Y coordinate of the reference point
(date_obs = "") Date of the observation (YYYY-MM-DD)\n
(update = no) Update image header WCS following fit?
(interactive = yes) Enter interactive image cursor loop?
(autocenter = no) Center at the catalog coords when entering task
(reselect = yes) Apply selectpars when entering task?
(autodisplay = yes) Redisplay after all-source keystroke command?
(verbose = yes) Print a running commentary?\n
(rotate = 0.) Relative position angle (CCW positive)
(boxsize = 9) Centering box full width
(edge = 200.) Edge buffer width (pixels)\n
(opaxis = no) Is the reference point on the optical axis?
(del_ra = 0.) RA offset of the field center (degrees)
(del_dec = 0.) Dec offset of the field center (degrees)\n
(list = "")
(mode = "ql") Results of imhead n1.0066.fits lo+:n1.0066.fits[2048,2048][real]: L104334
No bad pixels, min=0., max=0. (old)
Line storage mode, physdim [2048,2048], length of user area 2673 s.u.
Created Thu 13:42:23 03-Nov-2005, Last modified Thu 13:42:23 03-Nov-2005
Pixel file "n1.0066.fits" [ok]
EXTEND = F / File may contain extensions
ORIGIN = 'NOAO-IRAF FITS Image Kernel December 2001' / FITS file originator
DATE = '2005-11-03T13:42:23'
IRAF-TLM= '13:42:23 (03/11/2005)'
OBJECT = 'L104334 ' / Name of the object observed
OBSERVAT= 'KPNO ' / observatory
OBSERVER= 'Jore,Hastey ' / observers
EXPTIME = 70. / actual integration time, seconds
DARKTIME= 70. / total elapsed time, seconds
IMAGETYP= 'object ' / object, flat, bias, etc.
ST = '12:47:24 ' / sidereal time
RA = '12:42:16.60 ' / right ascension (hh:mm:ss)
DEC = '-00:41:17.0 ' / declination (dd:mm:ss)
EQUINOX = 2005.27 / equinox of RA and Dec
EPOCH = 2005.27 / same as EQUINOX (for back compat.)
ZD = '32.660 ' / zenith distance, degrees
AIRMASS = 1.18 / airmass
TELESCOP= 'kp09m ' / telescope name
COMMENT
DATE-OBS= '2005-04-07 ' / Y2K compliant (yyyy-mm-ddThh:mm:ss)
UT = '07:11:14.744 ' / universal time (start of exposure)
JD = '2453467.79947618 ' / julian date of observation
INITTIME= 1.462 / software/hardware initialization (sec)
PREPTIME= 5.102 / CCD preparation time (sec)
OBSTIME = 71.736 / active observing time (sec)
READTIME= 147.628 / CCD readout time (sec)
TOTTIME = 225.931 / total time spent in task (sec)
COMMENT
DETECTOR= 's2kb ' / detector name
PREFLASH= 0 / preflash time, seconds
GAIN = 3. / gain, electrons per adu
DWELL = 8 / sample integration time, microseconds
RDNOISE = 7. / read noise, electrons
CAMTEMP = -110 / camera temperature, Celsius
DEWTEMP = -166 / dewar temperature, Celsius
CCDSEC = '[1:2048,1:2048]' / orientation to full frame
ORIGSEC = '[1:2048,1:2048] ' / original size full frame
CCDSUM = '1 1 ' / on chip summation
INSTRUME= 'test ' / instrument name
FOCUS = '29187 ' / telescope focus position
FILTER1 = '3 ' / filter position, wheel 1
FILTER2 = '0 ' / filter position, wheel 2
FILTERS = ' 003' / dual filter position
OBSID = 'kp09m.20050407T071108Z' / archive ID for observation
RECID = 'kp09m.20050407T071108Z' / same as OBSID (for back compat.)
WCSDIM = 2
LTM1_1 = 1.
LTM2_2 = 1.
WAT0_001= 'system=physical'
WAT1_001= 'wtype=linear'
WAT2_001= 'wtype=linear'
TRIM = 'Oct 31 15:39 Trim data section is [1:2048,1:2048]'
OVERSCAN= 'Oct 31 15:39 Overscan section is [2049:2080,1:2048] with mean=1352.4'
ZEROCOR = 'Oct 31 15:39 Zero level correction image is Zero.imh'
CCDPROC = 'Nov 3 13:42 CCD processing done'
FLATCOR = 'Nov 3 13:42 Flat field image is domeflatv with scale=15338.75'NOTE:I have found a few other posts that report the same error. All of them are from 2002 (between Jul and Dec if I remember correctly). There were no replies to those posts. However, I did notice that the version of IRAF that I am running was built in July of 2002. Maybe this is a bug that was fixed in a newer version of IRAF and that's why I'm only seeing posts about this problem from back in 02?Thanks for any help you can provide.Josh
|