Welcome to iraf.net Tuesday, March 19 2024 @ 11:16 AM GMT


 Forum Index > Help Desk > General IRAF New Topic Post Reply
 Analysing FITS files with WSTART1
   
jsmoker
 11/17/2015 12:03PM (Read 1992 times)  
+----
Newbie

Status: offline


Registered: 09/15/2008
Posts: 8
Hello,

I am working on some data reduced with the UVES pipeline. The "merged" spectrum produced by the pipeline has ripples in it hence I am hoping to do the last part of order merging "by hand" in IRAF.

The fits file contains 20 different orders, each having a different wavelength range, some overlapping.

I can combine different spectra using "scombine" but when I plot them (either the coadded version or a spectrum before coadding) the wavelength scale is totally wrong (i.e. it is from about 0 to 130 Angstroms when it should be around 7000 Angstroms). Hence merging different orders where they overlap is not possible. A collaborator noted that the problem likely was that splot is just looking at the CR* headers and not the WSTART1, WEND1, WSTART2, WEND2...WSTART20, WEND20 fits keywords. Her suggestion was to use IDL to write a script to strip out the individual orders etc but I wonder if there is an easier way to do this in IRAF.

Is there any IRAF package that can interpret these keywords?

The spectrum I am looking at is available here: www.sc.eso.org/~jsmoker/IRAF/resampled_01.fits (not coadded, "raw" output from the UVES pipeline).

The output from dfits is shown below.

Note that I thought that "sptables" would be the correct package (c.f. http://archive.eso.org/cms/eso-data/help/1dspectra.html) but that seems to be for another format and does not plot out the spectrum correctly. I have also tried longslit with no success.

Thanks!

Jonathan

====\$this->_split2($m[0]) file resampled_01.fits (main) <====
SIMPLE = T / file does conform to FITS standard
BITPIX = -32 / number of bits per data pixel
NAXIS = 2 / number of data axes
NAXIS1 = 6932 / length of data axis 1
NAXIS2 = 20 / length of data axis 2
EXTEND = T / FITS dataset may contain extensions
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&amp;A...376..359H
DATE = '2015-11-16T17:00:27' / file creation date (YYYY-MM-DDThh:mm:ss UT)
CTYPE1 = 'AWAV '
CTYPE2 = 'ORDER '
CUNIT1 = 'Angstrom' / Wavelength units
BUNIT = 'ADU '
CRVAL1 = 0.
CRVAL2 = 1.
CRPIX1 = 1.
CRPIX2 = 1.
CDELT1 = 0.0201169428086644
CDELT2 = 1.
WSTART1 = 6649.51462680436
WEND1 = 6760.29863085168
WSTART2 = 6723.4242746834
WEND2 = 6835.41529529923
WSTART3 = 6798.98351187274
WEND3 = 6912.22178294271
WSTART4 = 6876.27280614363
WEND4 = 6990.75832766774
WSTART5 = 6955.33239138168
WEND5 = 7071.12551418835
WSTART6 = 7036.22261841532
WEND6 = 7153.34345944736
WSTART7 = 7119.02395501578
WEND7 = 7237.49263121601
WSTART8 = 7203.79675201149
WEND8 = 7323.65349726552
WSTART9 = 7290.62147717369
WEND9 = 7411.90652536713
WSTART10= 7379.5584813308
WEND10 = 7502.29194940646
WSTART11= 7470.68823225405
WEND11 = 7594.91035409755
WSTART12= 7564.09119771467
WEND12 = 7689.84220721163
WSTART13= 7659.86796242673
WEND13 = 7787.18809346276
WSTART14= 7758.09899416143
WEND14 = 7887.02848062216
WSTART15= 7858.88487763284
WEND15 = 7989.44383646107
WSTART16= 7962.32619755499
WEND16 = 8094.57497957915
WSTART17= 8068.52353864193
WEND17 = 8202.50237774764
WSTART18= 8177.59760255051
WEND18 = 8313.34673262338
WSTART19= 8289.64897399477
WEND19 = 8427.22874586323
WSTART20= 8404.81847157438
WEND20 = 8544.24900218123
LAMRMS = 0.001103 / RMS of wavelength solution [CUNIT1]
LAMNLIN = 536 / No. of lines used in wavelength solution
CRDER1 = 4.76E-05 / Wavelength uncertainty [CUNIT1]
CSYER1 = 0.000254 / Typical systematic wavelength error [CUNIT1]
EXTNAME = 'Rebinned 2d spectrum'
ORIGIN = 'ESO ' / European Southern Observatory.
TELESCOP= 'ESO-VLT-U2' / ESO Telescope Name
INSTRUME= 'UVES ' / Instrument used.
OBJECT = 'HD170740' / Original target.
RA = 277.85713 / 18:31:25.7 RA (J2000) pointing
DEC = -10.79621 / -10:47:46.3 DEC (J2000) pointing
EQUINOX = 2000. / Standard FK5
RADECSYS= 'FK5 ' / Coordinate reference frame
MJD-OBS = 56915.118737632 / MJD start (2014-09-15T02:50:58.931)
DATE-OBS= '2014-09-15T02:50:58.931' / Date of observation
UTC = 10254. / 02:50:54.000 UTC at start
LST = 78316.116 / 21:45:16.116 LST at start
PI-COI = 'UNKNOWN ' / PI-COI name.
OBSERVER= 'UNKNOWN ' / Name of observer.
ARCFILE = 'UVES.2014-09-15T02:50:58.931.fits' / Archive File Name
DATAMD5 = '9fef8988a710c52bdc27258e41321299' / MD5 checksum
PIPEFILE= 'resampled_science_redl.fits' / Filename of data product
DATAMIN = -379265.242146831 / Minimum of pixel values
DATAMAX = 633623.004233697 / Maximum of pixel values
EXPTIME = 17.9991 / Total integration time
CD1_1 = 0.0201169428086644
CD1_2 = 0.
CD2_1 = 0.
CD2_2 = 1.
HIERARCH ESO OBS AIRM = 2. / Req. max. airmass
HIERARCH ESO OBS AMBI FWHM = 2. / Req. max. seeing
HIERARCH ESO OBS AIRM = 2. / Req. max. airmass
HIERARCH ESO OBS AMBI FWHM = 2. / Req. max. seeing
HIERARCH ESO OBS AMBI TRANS = '4THK ' / Req. sky transparency
HIERARCH ESO OBS ATM = 'NATM ' / Req. Atmospheric Turbulence Model
HIERARCH ESO OBS CONTAINER ID = 1137077 / Scheduling container ID
HIERARCH ESO OBS CONTAINER TYPE = 'G ' / Scheduling container type
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.12' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 1755 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 1137082 / Observation block ID
HIERARCH ESO OBS MOON DIST = 30 / Req. min. angular dist. from moon
HIERARCH ESO OBS MOON FLI = 1. / Req. max. fractional lunar illum.
HIERARCH ESO OBS NAME = 'HD170740_dic2_1' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 11857 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '194.C-0833(A)' / ESO program identification
HIERARCH ESO OBS STREHLRATIO = 0. / Req. strehl ratio
HIERARCH ESO OBS TARG NAME = 'HD170740' / OB target name
HIERARCH ESO OBS TWILIGHT = 0 / Req. twilight
HIERARCH ESO OBS WATERVAPOUR = 0. / Req. water vapour
HIERARCH ESO OBS START = '2014-09-15T02:45:59' / OB start time
HIERARCH ESO OBS NTPL = 2 / Number of templates within OB
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL ID = 'UVES_dic2_obs_exp' / Template signature ID
HIERARCH ESO TPL NAME = 'Dic2 Observation' / Template name
HIERARCH ESO TPL PRESEQ = 'UVES_dic_obs.seq' / Sequencer script
HIERARCH ESO TPL START = '2014-09-15T02:50:39' / TPL start time
HIERARCH ESO TPL VERSION = '@(#) $Revision: 163655 $' / Version of the templ
HIERARCH ESO TPL NEXP = 39 / Number of exposures within templat
HIERARCH ESO TPL EXPNO = 1 / Exposure number within template
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL ID = 'v 254420' / TCS version number
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL ALT = 42.277 / Alt angle at start
HIERARCH ESO TEL AZ = 97.965 / Az angle at start S=0,W=90
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT = -24.6272 / Tel geo latitute (+=North)
HIERARCH ESO TEL GEOLON = -70.4048 / Tel geo longitude (+=East)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL FOCU ID = 'NB ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 120. / Focal length
HIERARCH ESO TEL FOCU SCALE = 1.718 / Focal scale
HIERARCH ESO TEL FOCU VALUE = -29.58 / M2 setting
HIERARCH ESO TEL PARANG START = 113.587 / Parallactic angle at start
HIERARCH ESO TEL AIRM START = 1.485 / Airmass at start
HIERARCH ESO TEL AMBI FWHM START = -1. / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI PRES START = 745.03 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI WINDSP = 13.68 / Observatory ambient wind speed que
HIERARCH ESO TEL AMBI WINDDIR = 55. / Observatory ambient wind direction
HIERARCH ESO TEL AMBI RHUM = 8.5 / Observatory ambient relative humid
HIERARCH ESO TEL AMBI TEMP = 11.11 / Observatory ambient temperature qu
HIERARCH ESO TEL MOON RA = 70.847666 / 04:43:23.4 RA (J2000)
HIERARCH ESO TEL MOON DEC = 18.33148 / 18:19:53.3 DEC (J2000)
HIERARCH ESO TEL TH M1 TEMP = 10.22 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL TARG ALPHA = 183125.694 / Alpha coordinate for the target
HIERARCH ESO TEL TARG DELTA = -104745.01 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Julian)
HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox
HIERARCH ESO TEL TARG PMA = 0.00125 / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = -0.01776 / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity
HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax
HIERARCH ESO TEL TARG COORDTYPE = 'M ' / Coordinate type (M=mean A=apparen
HIERARCH ESO TEL PARANG END = 113.568 / Parallactic angle at end
HIERARCH ESO TEL AIRM END = 1.488 / Airmass at end
HIERARCH ESO TEL AMBI FWHM END = -1. / Observatory Seeing queried from AS
HIERARCH ESO TEL IA FWHM = 1.16 / Delivered seeing corrected by airm
HIERARCH ESO TEL IA FWHMLIN = 3. / Delivered seeing on IA detector (l
HIERARCH ESO TEL IA FWHMLINOBS = 3.81 / Delivered seeing on IA detector (l
HIERARCH ESO TEL AMBI PRES END = 745.03 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI TAU0 = 0.0015 / Average coherence time
HIERARCH ESO INS ID = 'UVES/$Revision: 250420 $' / Instrument ID.
HIERARCH ESO INS DID = 'ESO-VLT-DIC.UVES_ICS-215796' / Data dictionary f
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS PATH = 'RED ' / Optical path used.
HIERARCH ESO INS ADC MODE = 'OFF ' / ADC mode.
HIERARCH ESO INS DPOL MODE = 'OFF ' / Instrument depolarizer mode.
HIERARCH ESO INS MODE = 'DICHR#2 ' / Instrument mode used.
HIERARCH ESO INS SHUT1 ID = 'TSH ' / Shutter ID.
HIERARCH ESO INS SHUT1 NAME = 'Tel_Shutter' / Shutter name.
HIERARCH ESO INS SHUT1 ST = T / Shutter open.
HIERARCH ESO INS MIRR1 ID = 'FREE ' / Mirror unique ID.
HIERARCH ESO INS MIRR1 NAME = 'FREE ' / Mirror common name.
HIERARCH ESO INS MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS SHUT3 ID = 'TSH3 ' / Shutter ID.
HIERARCH ESO INS SHUT3 NAME = 'D2L_Shutter' / Shutter name.
HIERARCH ESO INS SHUT3 ST = F / Shutter open.
HIERARCH ESO INS SHUT4 ID = 'TSH4 ' / Shutter ID.
HIERARCH ESO INS SHUT4 NAME = 'ThAr_Shutter' / Shutter name.
HIERARCH ESO INS SHUT4 ST = F / Shutter open.
HIERARCH ESO INS LAMP7 SWSIM = T / If T, function is software simulat
HIERARCH ESO INS SLIT3 WID = 0.3 / Slit width [arcsec].
HIERARCH ESO INS SLIT3 Y1FRML= 'ENC=OFFSET+RESOL*acos((WID-(MAX+MIN))/(MAX-MIN)'
HIERARCH ESO INS SLIT3 Y1OFFSET = 4750 / Left ref. position [Enc].
HIERARCH ESO INS SLIT3 Y1RESOL = 40. / Left encoder resolution [Enc/deg].
HIERARCH ESO INS SLIT3 Y1WIDMAX = 5.572 / Left max. slit width value [arcsec
HIERARCH ESO INS SLIT3 Y1WIDMIN = 0.062 / Left min. slit width value [arcsec
HIERARCH ESO INS SLIT3 Y2FRML= 'ENC=OFFSET+RESOL*acos((WID-(MAX+MIN))/(MAX-MIN)'
HIERARCH ESO INS SLIT3 Y2OFFSET = 4560 / Right ref. position [Enc].
HIERARCH ESO INS SLIT3 Y2RESOL = 40. / Right encoder resolution [Enc/deg]
HIERARCH ESO INS SLIT3 Y2WIDMAX = 5.513 / Right max. slit width value [arcse
HIERARCH ESO INS SLIT3 Y2WIDMIN = 0.05 / Right min. slit width value [arcse
HIERARCH ESO INS SLIT3 Y1ENC = 11369 / Slit Vertical top motor absolute e
HIERARCH ESO INS SLIT3 Y2ENC = 11138 / Slit Vertical bottom motor absolut
HIERARCH ESO INS SHUT2 ID = 'SPSH ' / Shutter ID.
HIERARCH ESO INS SHUT2 NAME = 'Sphere_Shutter' / Shutter name.
HIERARCH ESO INS SHUT2 ST = F / Shutter open.
HIERARCH ESO INS OPTI1 ID = '1 ' / General Optical device unique ID.
HIERARCH ESO INS OPTI1 NAME = 'OUT ' / General Optical device common name
HIERARCH ESO INS OPTI1 NO = 1 / Slot number.
HIERARCH ESO INS OPTI1 TYPE = 'FREE ' / General Optical device Element.
HIERARCH ESO INS SLIT3 LEN = 12. / Slit length [arcsec].
HIERARCH ESO INS SLIT3 X1FRML= 'ENC=OFFSET+RESOL*acos((LEN-(MAX+MIN))/(MAX-MIN)'
HIERARCH ESO INS SLIT3 X1OFFSET = 2381 / Left ref. position [Enc].
HIERARCH ESO INS SLIT3 X1RESOL = 40. / Left encoder resolution [Enc/deg].
HIERARCH ESO INS SLIT3 X1LENMAX = 15.752 / Left max. slit length [arcsec].
HIERARCH ESO INS SLIT3 X1LENMIN = 0.087 / Left min. slit length [arcsec].
HIERARCH ESO INS SLIT3 X2FRML= 'ENC=OFFSET+RESOL*acos((LEN-(MAX+MIN))/(MAX-MIN)'
HIERARCH ESO INS SLIT3 X2OFFSET = 2307 / Right ref. position [Enc].
HIERARCH ESO INS SLIT3 X2RESOL = 40. / Right encoder resolution [Enc/deg]
HIERARCH ESO INS SLIT3 X2LENMAX = 15.833 / Right max. slit length [arcsec].
HIERARCH ESO INS SLIT3 X2LENMIN = 0.064 / Right min. slit length [arcsec].
HIERARCH ESO INS SLIT3 X1ENC = 6548 / Slit Horizontal left motor absolut
HIERARCH ESO INS SLIT3 X2ENC = 6479 / Slit Horizontal right motor absolu
HIERARCH ESO INS SLIT1 NAME = 'FREE ' / Slit common name.
HIERARCH ESO INS SLIT1 NO = 1 / Slide position.
HIERARCH ESO INS SLIT1 WID = 0. / Slit width [arcsec].
HIERARCH ESO INS SLIT1 LEN = 0. / Slit length [arcsec].
HIERARCH ESO INS DROT MODE = 'ELEV ' / Instrument derotator mode.
HIERARCH ESO INS DROT RA = 183125.711243 / ~~:~~:~~.~ RA (J2000) pointing [d
HIERARCH ESO INS DROT DEC = -104746.367552 / -~~:~~:~~.~ DEC (J2000) pointing
HIERARCH ESO INS DROT POSANG = 0. / Position angle [deg].
HIERARCH ESO INS DROT BEGIN = 158.9467 / Physical position at start [deg].
HIERARCH ESO INS DROT END = 158.996 / Physical position at end [deg].
HIERARCH ESO INS FILT3 ID = 'BS5 ' / Filter unique id.
HIERARCH ESO INS FILT3 NAME = 'OG590 ' / Filter common name.
HIERARCH ESO INS FILT3 NO = 5 / Filter wheel position index.
HIERARCH ESO INS DET6 NAME = 'Red_ExpMeter' / Exposure meter name.
HIERARCH ESO INS DET6 CTMIN = 1938. / Minimum count during exposure.
HIERARCH ESO INS DET6 CTMAX = 2833. / Maximum count during exposure.
HIERARCH ESO INS DET6 CTTOT = 60593. / Total counts during exposure.
HIERARCH ESO INS DET6 CTMEAN = 2423.7 / Average counts during exposure.
HIERARCH ESO INS DET6 CTRMS = 225.34 / RMS of counts during exposure.
HIERARCH ESO INS DET6 TMMEAN = 0.51 / Normalised mean exposure time.
HIERARCH ESO INS DET6 UIT = 1. / User defined Integration time [sec
HIERARCH ESO INS DET6 OFFDRK = 0. / Average dark background counts.
HIERARCH ESO INS DET6 OFFSKY = 1. / Average sky background counts.
HIERARCH ESO INS DPOS NAME = 'OUT ' / Instrument depolarizer slide posit
HIERARCH ESO INS DPOS NO = 1 / Depolarizer slide position.
HIERARCH ESO INS SHUT6 ID = 'REXS ' / Shutter ID.
HIERARCH ESO INS SHUT6 NAME = 'Red_ExpMeterSh' / Shutter name.
HIERARCH ESO INS SHUT6 ST = T / Shutter open.
HIERARCH ESO INS DPOR ST = F / Instrument depolarizer rotating.
HIERARCH ESO INS ADCS NAME = 'OUT ' / ADC slide position.
HIERARCH ESO INS ADCS NO = 1 / ADC slide position.
HIERARCH ESO INS ADC1 MODE = 'OFF ' / ADC mode.
HIERARCH ESO INS ADC1 RA = 183125.711243 / ~~:~~:~~.~ RA (J2000) pointing [d
HIERARCH ESO INS ADC1 DEC = -104746.367552 / -~~:~~:~~.~ DEC (J2000) pointing
HIERARCH ESO INS ADC1 BEGIN = 211.306 / Position angle at start [deg].
HIERARCH ESO INS ADC1 END = 211.306 / Position angle at end [deg].
HIERARCH ESO INS GRAT2 ID = 'CD#4B ' / Grating unique ID.
HIERARCH ESO INS GRAT2 NAME = 'CD#4 ' / Grating common name.
HIERARCH ESO INS GRAT2 FRML = 'ENC=Z+R*asin(WL*OR*GRV/(2*cos(ROT)))+TR*(T-T0)'
HIERARCH ESO INS GRAT2 ZORDER = 391497 / Grating zero order position [Enc].
HIERARCH ESO INS GRAT2 RESOL = 22500. / Resolution in encoder steps.
HIERARCH ESO INS GRAT2 GROOVES = 0.0003125 / Grating grooves / nm [gr/nm].
HIERARCH ESO INS GRAT2 ROT = 22.668 / Grating rot angle [deg].
HIERARCH ESO INS GRAT2 TEMPRAMP = 25.67 / Temperature slope [Enc/C].
HIERARCH ESO INS GRAT2 TEMPREF = 12.4 / Temperature reference value.
HIERARCH ESO INS PIXSCALE = 0.182 / Pixel scale [arcsec].
HIERARCH ESO INS GRAT2 X = 2048. / X pixel for central wavelength.
HIERARCH ESO INS GRAT2 Y = 2048. / Y pixel for central wavelength.
HIERARCH ESO INS GRAT2 NO = 2 / Grating wheel position index.
HIERARCH ESO INS GRAT2 WLEN = 860. / Grating central wavelength [nm].
HIERARCH ESO INS GRAT2 ENC = 579817 / Grating absolute encoder position.
HIERARCH ESO INS ADC2 MODE = 'OFF ' / ADC mode.
HIERARCH ESO INS ADC2 RA = 183125.711243 / ~~:~~:~~.~ RA (J2000) pointing [d
HIERARCH ESO INS ADC2 DEC = -104746.367552 / -~~:~~:~~.~ DEC (J2000) pointing
HIERARCH ESO INS ADC2 BEGIN = 161.444 / Position angle at start [deg].
HIERARCH ESO INS ADC2 END = 161.444 / Position angle at end [deg].
HIERARCH ESO INS TILT2 POS = 0. / Science camera tilt [pix].
HIERARCH ESO INS TILT2 FRML = 'ENC=OFFSET+RESOL*asin(2*POS-(MAX+MIN)/(MAX-MIN)'
HIERARCH ESO INS TILT2 OFFSET = 15876. / Offset in Formula.
HIERARCH ESO INS TILT2 RESOL = -100. / Resolution in encoder steps.
HIERARCH ESO INS TILT2 POSMIN = -222. / Minimum camera tilt [pix].
HIERARCH ESO INS TILT2 POSMAX = 222. / Maximum camera tilt [pix].
HIERARCH ESO INS TILT2 TEMP = 9.2 / Temperature used to position the c
HIERARCH ESO INS TILT2 ENC = 15895 / Camera tilt absolute encoder posit
HIERARCH ESO INS FILT1 ID = 'FREE ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'FREE ' / Filter common name.
HIERARCH ESO INS FILT1 NO = 13 / Filter wheel position index.
HIERARCH ESO INS SHUT7 ID = 'FPSH ' / Shutter ID.
HIERARCH ESO INS SHUT7 NAME = 'FibrProjShutter' / Shutter name.
HIERARCH ESO INS SHUT7 ST = F / Shutter open.
HIERARCH ESO INS TEMP1 ID = 'TMBC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP1 NAME = 'Temp. blue camera' / Temperature sensor name.
HIERARCH ESO INS TEMP1 VAL = 9.6 / Temperature sensor numeric value [
HIERARCH ESO INS TEMP1 MIN = 9.6 / Minimum temperature [C].
HIERARCH ESO INS TEMP1 MAX = 9.6 / Maximum temperature [C].
HIERARCH ESO INS TEMP1 MEAN = 9.6 / Average temperature [C].
HIERARCH ESO INS TEMP1 RMS = 0. / RMS of samples over exposure.
HIERARCH ESO INS TEMP2 ID = 'TMRC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP2 NAME = 'Temp. red camera' / Temperature sensor name.
HIERARCH ESO INS TEMP2 VAL = 9.2 / Temperature sensor numeric value [
HIERARCH ESO INS TEMP2 MIN = 9.2 / Minimum temperature [C].
HIERARCH ESO INS TEMP2 MAX = 9.2 / Maximum temperature [C].
HIERARCH ESO INS TEMP2 MEAN = 9.2 / Average temperature [C].
HIERARCH ESO INS TEMP2 RMS = 0. / RMS of samples over exposure.
HIERARCH ESO INS TEMP3 ID = 'TMT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP3 NAME = 'Temp. table' / Temperature sensor name.
HIERARCH ESO INS TEMP3 VAL = 9.3 / Temperature sensor numeric value [
HIERARCH ESO INS TEMP3 MIN = 9.3 / Minimum temperature [C].
HIERARCH ESO INS TEMP3 MAX = 9.3 / Maximum temperature [C].
HIERARCH ESO INS TEMP3 MEAN = 9.3 / Average temperature [C].
HIERARCH ESO INS TEMP3 RMS = 0. / RMS of samples over exposure.
HIERARCH ESO INS TEMP4 ID = 'TMIA ' / Temperature sensor ID.
HIERARCH ESO INS TEMP4 NAME = 'Temp. inside air' / Temperature sensor name.
HIERARCH ESO INS TEMP4 VAL = 10.5 / Temperature sensor numeric value [
HIERARCH ESO INS TEMP4 MIN = 10.5 / Minimum temperature [C].
HIERARCH ESO INS TEMP4 MAX = 10.5 / Maximum temperature [C].
HIERARCH ESO INS TEMP4 MEAN = 10.5 / Average temperature [C].
HIERARCH ESO INS TEMP4 RMS = 0. / RMS of samples over exposure.
HIERARCH ESO INS OPTI2 ID = 'Diaphr.27mm' / General Optical device unique ID.
HIERARCH ESO INS OPTI2 NAME = 'OVRSIZ ' / General Optical device common name
HIERARCH ESO INS OPTI2 NO = 3 / Slot number.
HIERARCH ESO INS OPTI2 TYPE = 'SLIDE ' / General Optical device Element.
HIERARCH ESO INS SENS26 ID = 'BARO ' / sensor ID.
HIERARCH ESO INS SENS26 NAME = 'Barometer pressure' / sensor common name.
HIERARCH ESO INS SENS26 VAL = 744.3 / Sensor numeric value.
HIERARCH ESO INS SENS26 MIN = 744.4 / Minimum sensor value.
HIERARCH ESO INS SENS26 MAX = 744.4 / Maximum sensor value.
HIERARCH ESO INS SENS26 MEAN = 744.4 / Average sensor value.
HIERARCH ESO INS SENS26 RMS = 0. / RMS of samples over exposure.
HIERARCH ESO INS MIRR2 ID = 'DICHR#2 ' / Mirror unique ID.
HIERARCH ESO INS MIRR2 NAME = 'DICHR#2 ' / Mirror common name.
HIERARCH ESO INS MIRR2 NO = 4 / Mirror slide position.
HIERARCH ESO INS SENSOR5 SWSIM = T / If T, function is software simulat
HIERARCH ESO INS TEMP31 ID = 'IODT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP31 NAME = 'Iodine cell temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP31 VAL = 11.6 / Temperature sensor numeric value [
HIERARCH ESO INS TEMP31 MIN = 11.6 / Minimum temperature [C].
HIERARCH ESO INS TEMP31 MAX = 11.7 / Maximum temperature [C].
HIERARCH ESO INS TEMP31 MEAN = 11.7 / Average temperature [C].
HIERARCH ESO INS TEMP31 RMS = 0.1 / RMS of samples over exposure.
HIERARCH ESO INS SHUT8 ST = F / Shutter open.
HIERARCH ESO INS SHUT9 ST = F / Shutter open.
HIERARCH ESO INS SHUT10 ST = F / Shutter open.
HIERARCH ESO DET ID = 'CCD FIERA - Rev: 238334' / Detector system Id
HIERARCH ESO DET NAME = 'ccdUvR - ccdUvr' / Name of detector system
HIERARCH ESO DET DATE = '1998-07-09' / Installation date
HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET RA = 277.85713017 / Apparent 18:31:25.7 RA at start
HIERARCH ESO DET DEC = -10.796213208 / Apparent -10:47:46.3 DEC at start
HIERARCH ESO DET CHIPS = 2 / # of chips in detector array
HIERARCH ESO DET OUTPUTS = 2 / # of outputs
HIERARCH ESO DET OUTREF = 0 / reference output
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET EXP NO = 14981 / Unique exposure ID number
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP RDTTIME = 39.471 / image readout time
HIERARCH ESO DET EXP XFERTIM = 39.425 / image transfer time
HIERARCH ESO DET WIN1 ST = T / If T, window enabled
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 NX = 4296 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 4096 / # of pixels along Y
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 UIT1 = 18. / user defined subintegration time
HIERARCH ESO DET WIN1 DIT1 = 17.999088 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 18.6809 / Dark current time
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ SPEED = '2pts/225kHz/lg' / Readout speed
HIERARCH ESO DET READ CLOCK = '225kHz/2ports/low_gain' / Readout clock pattern
HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Type of frame
HIERARCH ESO DET SHUT TYPE = 'Slit ' / type of shutter
HIERARCH ESO DET SHUT ID = 'ccdUvr shutter' / Shutter unique identifier
HIERARCH ESO DET SHUT TMOPEN = 0.042 / Time taken to open shutter
HIERARCH ESO DET SHUT TMCLOS = 0.04 / Time taken to close shutter
HIERARCH ESO DET TELE INT = 60. / Interval between two successive te
HIERARCH ESO DET TELE NO = 3 / # of sources active
HIERARCH ESO DET TLM1 NAME = 'CCD T1 ' / Description of telemetry param.
HIERARCH ESO DET TLM1 ID = 'CCD Sensor1' / ID of telemetry sensor
HIERARCH ESO DET TLM1 START = 135. / Telemetry value at read start
HIERARCH ESO DET TLM1 END = 135. / Telemetry value at read completion
HIERARCH ESO DET TLM2 NAME = 'CCD T2 ' / Description of telemetry param.
HIERARCH ESO DET TLM2 ID = 'CCD Sensor2' / ID of telemetry sensor
HIERARCH ESO DET TLM2 START = 137.4 / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 137.4 / Telemetry value at read completion
HIERARCH ESO DET TLM3 NAME = 'EBOX T ' / Description of telemetry param.
HIERARCH ESO DET TLM3 ID = 'Box Temp' / ID of telemetry sensor
HIERARCH ESO DET TLM3 START = 288.8 / Telemetry value at read start
HIERARCH ESO DET TLM3 END = 288.8 / Telemetry value at read completion
HIERARCH ESO DET CHIP2 INDEX = 2 / Chip index
HIERARCH ESO DET CHIP2 ID = 'CCD-44 ' / Detector chip identification
HIERARCH ESO DET CHIP2 NAME = 'MIT/LL, EEV' / Detector chip name
HIERARCH ESO DET CHIP2 DATE = '1998-07-09' / Date of installation [YYYY-MM-DD]
HIERARCH ESO DET CHIP2 X = 2 / X location in array
HIERARCH ESO DET CHIP2 Y = 1 / Y location in array
HIERARCH ESO DET CHIP2 NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP2 NY = 4096 / # of pixels along Y
HIERARCH ESO DET CHIP2 PSZX = 15. / Size of pixel in X
HIERARCH ESO DET CHIP2 PSZY = 15. / Size of pixel in Y
HIERARCH ESO DET CHIP2 XGAP = 0. / Gap between chips along x
HIERARCH ESO DET CHIP2 YGAP = 0. / Gap between chips along y
HIERARCH ESO DET OUT1 INDEX = 2 / Output index
HIERARCH ESO DET OUT1 ID = 'R ' / Output ID as from manufacturer
HIERARCH ESO DET OUT1 NAME = 'R ' / Description of output
HIERARCH ESO DET OUT1 CHIP = 2 / Chip to which the output belongs
HIERARCH ESO DET OUT1 X = 4096 / X location of output
HIERARCH ESO DET OUT1 Y = 1 / Y location of output
HIERARCH ESO DET OUT1 NX = 2048 / valid pixels along X
HIERARCH ESO DET OUT1 NY = 4096 / valid pixels along Y
HIERARCH ESO DET OUT1 CONAD = 1.47 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT1 RON = 4. / [e-] Readout noise per output (ele
HIERARCH ESO DET OUT1 GAIN = 0.68 / Conversion from electrons to ADU
HIERARCH ESO PRO ANCESTOR = 'UVES.2014-09-15T02:50:58.931.fits'
HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO
HIERARCH ESO PRO CATG = 'WCALIB_SCIENCE_REDL' / Category of pipeline product fra
HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type
HIERARCH ESO PRO TECH = 'ECHELLE ' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'uves_obs_scired' / Pipeline recipe (unique) identifi
HIERARCH ESO PRO REC1 DRS ID = 'cpl-6.6 ' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'uves/5.5.7' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME = 'UVES.2014-09-15T02:50:58.931.fits' / File nam
HIERARCH ESO PRO REC1 RAW1 CATG = 'SCIENCE_RED' / Category of raw frame
HIERARCH ESO PRO DATANCOM = 1 / Number of combined frames
HIERARCH ESO PRO REC1 CAL1 NAME = 'atmoexan.fits' / File name of calibration fra
HIERARCH ESO PRO REC1 CAL1 CATG = 'EXTCOEFF_TABLE' / Category of calibration fra
HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'cafc5e77cc338973e8d33cefcdc0afb2' / MD5 si
HIERARCH ESO PRO REC1 CAL2 NAME = 'masterbias_redl.fits' / File name of calibrat
HIERARCH ESO PRO REC1 CAL2 CATG = 'MASTER_BIAS_REDL' / Category of calibration f
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = 'ad71ed86d93752d42935560570de5c59' / MD5 si
HIERARCH ESO PRO REC1 CAL3 NAME = 'masterbias_redu.fits' / File name of calibrat
HIERARCH ESO PRO REC1 CAL3 CATG = 'MASTER_BIAS_REDU' / Category of calibration f
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '522fadd18658bb7840c522f97a5517e1' / MD5 si
HIERARCH ESO PRO REC1 CAL4 NAME = 'lineguesstable_redl.fits' / File name of cali
HIERARCH ESO PRO REC1 CAL4 CATG = 'LINE_GUESS_TAB_REDL' / Category of calibratio
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = 'dd511f8d6109b8d64f89b113d3101d3b' / MD5 si
HIERARCH ESO PRO REC1 CAL5 NAME = 'orderguesstable_redl.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL5 CATG = 'ORDER_GUESS_TAB_REDL' / Category of calibrati
HIERARCH ESO PRO REC1 CAL5 DATAMD5 = '1ca854e89f4599e784085be20c42e51f' / MD5 si
HIERARCH ESO PRO REC1 CAL6 NAME = 'lineguesstable_redu.fits' / File name of cali
HIERARCH ESO PRO REC1 CAL6 CATG = 'LINE_GUESS_TAB_REDU' / Category of calibratio
HIERARCH ESO PRO REC1 CAL6 DATAMD5 = '2337f2a5eb18d522d2650a29ed2afdff' / MD5 si
HIERARCH ESO PRO REC1 CAL7 NAME = 'orderguesstable_redu.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL7 CATG = 'ORDER_GUESS_TAB_REDU' / Category of calibrati
HIERARCH ESO PRO REC1 CAL7 DATAMD5 = 'e4fd279d3f326f55371937078e9896af' / MD5 si
HIERARCH ESO PRO REC1 CAL8 NAME = 'ordertable_redl.fits' / File name of calibrat
HIERARCH ESO PRO REC1 CAL8 CATG = 'ORDER_TABLE_REDL' / Category of calibration f
HIERARCH ESO PRO REC1 CAL8 DATAMD5 = 'a3e2120113aba6d219da2f6b8c679985' / MD5 si
HIERARCH ESO PRO REC1 CAL9 NAME = 'ordertable_redu.fits' / File name of calibrat
HIERARCH ESO PRO REC1 CAL9 CATG = 'ORDER_TABLE_REDU' / Category of calibration f
HIERARCH ESO PRO REC1 CAL9 DATAMD5 = '28429144bc4d5528a994e186b162b01d' / MD5 si
HIERARCH ESO PRO REC1 CAL10 NAME = 'masterflat_redl.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL10 CATG = 'MASTER_FLAT_REDL' / Category of calibration
HIERARCH ESO PRO REC1 CAL10 DATAMD5 = '6dada3f495336fa75befd7b06fd1690b' / MD5 s
HIERARCH ESO PRO REC1 CAL11 NAME = 'masterflat_redu.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL11 CATG = 'MASTER_FLAT_REDU' / Category of calibration
HIERARCH ESO PRO REC1 CAL11 DATAMD5 = 'a4a58a7a6c830cc6143547d01e3c222d' / MD5 s
HIERARCH ESO PRO REC1 CAL12 NAME = 'linetable_redl.fits' / File name of calibrat
HIERARCH ESO PRO REC1 CAL12 CATG = 'LINE_TABLE_REDL' / Category of calibration f
HIERARCH ESO PRO REC1 CAL12 DATAMD5 = '33d4cd19fc96069b672ba9a9d3f281d8' / MD5 s
HIERARCH ESO PRO REC1 CAL13 NAME = 'linetable_redu.fits' / File name of calibrat
HIERARCH ESO PRO REC1 CAL13 CATG = 'LINE_TABLE_REDU' / Category of calibration f
HIERARCH ESO PRO REC1 CAL13 DATAMD5 = 'fe4c0637bba0bb546e9fcfd4df56c226' / MD5 s
HIERARCH ESO PRO REC1 PARAM1 NAME = 'debug ' / Whether or not to save intermed
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM2 NAME = 'plotter ' / Any plots produced by the recip
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'no ' / Default: 'no'
HIERARCH ESO PRO REC1 PARAM3 NAME = 'process_chip' / For RED arm data process th
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'BOTH ' / Default: 'both'
HIERARCH ESO PRO REC1 PARAM4 NAME = 'clean_traps' / Clean detector traps. If TRU
HIERARCH ESO PRO REC1 PARAM4 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM5 NAME = 'reduce.backsub.mmethod' / Background measur
HIERARCH ESO PRO REC1 PARAM5 VALUE = 'median ' / Default: 'median'
HIERARCH ESO PRO REC1 PARAM6 NAME = 'reduce.backsub.npoints' / This is the numbe
HIERARCH ESO PRO REC1 PARAM6 VALUE = '82 ' / Default: 82
HIERARCH ESO PRO REC1 PARAM7 NAME = 'reduce.backsub.radiusy' / The height (in pi
HIERARCH ESO PRO REC1 PARAM7 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM8 NAME = 'reduce.backsub.sdegree' / Degree of interpo
HIERARCH ESO PRO REC1 PARAM8 VALUE = '1 ' / Default: 1
HIERARCH ESO PRO REC1 PARAM9 NAME = 'reduce.backsub.smoothx' / If spline interpo
HIERARCH ESO PRO REC1 PARAM9 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM10 NAME = 'reduce.backsub.smoothy' / If spline interp
HIERARCH ESO PRO REC1 PARAM10 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM11 NAME = 'reduce.extract.method' / Extraction method
HIERARCH ESO PRO REC1 PARAM11 VALUE = 'optimal ' / Default: 'optimal'
HIERARCH ESO PRO REC1 PARAM12 NAME = 'reduce.extract.kappa' / In optimal extract
HIERARCH ESO PRO REC1 PARAM12 VALUE = '10 ' / Default: 10
HIERARCH ESO PRO REC1 PARAM13 NAME = 'reduce.extract.chunk' / In optimal extract
HIERARCH ESO PRO REC1 PARAM13 VALUE = '32 ' / Default: 32
HIERARCH ESO PRO REC1 PARAM14 NAME = 'reduce.extract.profile' / In optimal extra
HIERARCH ESO PRO REC1 PARAM14 VALUE = 'auto ' / Default: 'auto'
HIERARCH ESO PRO REC1 PARAM15 NAME = 'reduce.extract.skymethod' / In optimal ext
HIERARCH ESO PRO REC1 PARAM15 VALUE = 'optimal ' / Default: 'optimal'
HIERARCH ESO PRO REC1 PARAM16 NAME = 'reduce.extract.oversample' / The oversampl
HIERARCH ESO PRO REC1 PARAM16 VALUE = '20 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM17 NAME = 'reduce.extract.best' / (optimal extraction
HIERARCH ESO PRO REC1 PARAM17 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM18 NAME = 'reduce.slitlength' / Extraction slit lengt
HIERARCH ESO PRO REC1 PARAM18 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM19 NAME = 'reduce.skysub' / Do sky-subtraction (only
HIERARCH ESO PRO REC1 PARAM19 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM20 NAME = 'reduce.objoffset' / Offset (in pixels) of
HIERARCH ESO PRO REC1 PARAM20 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM21 NAME = 'reduce.objslit' / Object window size (in p
HIERARCH ESO PRO REC1 PARAM21 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM22 NAME = 'reduce.tiltcorr' / If enabled (recommended
HIERARCH ESO PRO REC1 PARAM22 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM23 NAME = 'reduce.ffmethod' / Flat-fielding method. I
HIERARCH ESO PRO REC1 PARAM23 VALUE = 'pixel ' / Default: 'extract'
HIERARCH ESO PRO REC1 PARAM24 NAME = 'reduce.rebin.wavestep' / The bin size (in
HIERARCH ESO PRO REC1 PARAM24 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM25 NAME = 'reduce.rebin.scale' / Whether or not to mu
HIERARCH ESO PRO REC1 PARAM25 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM26 NAME = 'reduce.merge' / Order merging method. If '
HIERARCH ESO PRO REC1 PARAM26 VALUE = 'optimal ' / Default: 'optimal'
HIERARCH ESO PRO REC1 PARAM27 NAME = 'reduce.merge_delt1' / Order merging left h
HIERARCH ESO PRO REC1 PARAM27 VALUE = '8 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM28 NAME = 'reduce.merge_delt2' / Order merging right
HIERARCH ESO PRO REC1 PARAM28 VALUE = '2 ' / Default: 0
HIERARCH ESO PRO DATAMED = 2357.34501749208 / Median of pixel values
HIERARCH ESO PRO DATAAVG = 2600.0775851654 / Mean of pixel values
HIERARCH ESO PRO DATARMS = 5146.90858007469 / Standard deviation of pixel values
HIERARCH ESO PRO REC1 START = '2015-11-16T13:59:49'
HIERARCH ESO PRO REC1 STOP = '2015-11-16T14:00:27'
HIERARCH ESO ADA ABSROT START = 24.01851 / Abs rot angle at exp start
HIERARCH ESO ADA POSANG = 0. / Position angle at start
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA GUID RA = 277.752233 / 18:31:00.5 Guide star RA J2000
HIERARCH ESO ADA GUID DEC = -10.82954 / -10:49:46.3 Guide star DEC J2000
HIERARCH ESO ADA ABSROT PPOS = 'POS ' / sign of probe position
HIERARCH ESO ADA ABSROT END = 24.13464 / Abs rot angle at exp end
HIERARCH ESO OCS SIMCAL = 0 / Simultaneous Calibration flag
HIERARCH ESO QC DID = 'UVES-1.14' / ESO QC DID
HIERARCH ESO QC TEST1 ID = 'Science-Reduction-Test-Results' / Name of QC test
HIERARCH ESO QC ORD1 OBJ SN = 74.6379 / Av. S/N at order center
HIERARCH ESO QC ORD1 OBJ POS = 27.299 / Av. OBJ POS at order center
HIERARCH ESO QC ORD1 OBJ FWHM = 17.2267 / Av. FWHM on order
HIERARCH ESO QC ORD1 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD2 OBJ SN = 72.3041 / Av. S/N at order center
HIERARCH ESO QC ORD2 OBJ POS = 27.2205 / Av. OBJ POS at order center
HIERARCH ESO QC ORD2 OBJ FWHM = 17.2383 / Av. FWHM on order
HIERARCH ESO QC ORD2 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD3 OBJ SN = 69.6354 / Av. S/N at order center
HIERARCH ESO QC ORD3 OBJ POS = 27.147 / Av. OBJ POS at order center
HIERARCH ESO QC ORD3 OBJ FWHM = 17.0982 / Av. FWHM on order
HIERARCH ESO QC ORD3 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD4 OBJ SN = 66.7921 / Av. S/N at order center
HIERARCH ESO QC ORD4 OBJ POS = 27.0774 / Av. OBJ POS at order center
HIERARCH ESO QC ORD4 OBJ FWHM = 17.0293 / Av. FWHM on order
HIERARCH ESO QC ORD4 OBJ RPLPAR = 4.2083 / Av. relative ripple amplitude
HIERARCH ESO QC ORD5 OBJ SN = 64.5806 / Av. S/N at order center
HIERARCH ESO QC ORD5 OBJ POS = 27.0109 / Av. OBJ POS at order center
HIERARCH ESO QC ORD5 OBJ FWHM = 16.9368 / Av. FWHM on order
HIERARCH ESO QC ORD5 OBJ RPLPAR = 2.2406 / Av. relative ripple amplitude
HIERARCH ESO QC ORD6 OBJ SN = 62.3115 / Av. S/N at order center
HIERARCH ESO QC ORD6 OBJ POS = 26.9468 / Av. OBJ POS at order center
HIERARCH ESO QC ORD6 OBJ FWHM = 16.8473 / Av. FWHM on order
HIERARCH ESO QC ORD6 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD7 OBJ SN = 59.3427 / Av. S/N at order center
HIERARCH ESO QC ORD7 OBJ POS = 26.8844 / Av. OBJ POS at order center
HIERARCH ESO QC ORD7 OBJ FWHM = 16.7444 / Av. FWHM on order
HIERARCH ESO QC ORD7 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD8 OBJ SN = 57.0869 / Av. S/N at order center
HIERARCH ESO QC ORD8 OBJ POS = 26.8232 / Av. OBJ POS at order center
HIERARCH ESO QC ORD8 OBJ FWHM = 16.5964 / Av. FWHM on order
HIERARCH ESO QC ORD8 OBJ RPLPAR = 2.657 / Av. relative ripple amplitude
HIERARCH ESO QC ORD9 OBJ SN = 54.9759 / Av. S/N at order center
HIERARCH ESO QC ORD9 OBJ POS = 26.7629 / Av. OBJ POS at order center
HIERARCH ESO QC ORD9 OBJ FWHM = 16.4918 / Av. FWHM on order
HIERARCH ESO QC ORD9 OBJ RPLPAR = 0.7596 / Av. relative ripple amplitude
HIERARCH ESO QC ORD10 OBJ SN = 52.7823 / Av. S/N at order center
HIERARCH ESO QC ORD10 OBJ POS = 26.7032 / Av. OBJ POS at order center
HIERARCH ESO QC ORD10 OBJ FWHM = 16.424 / Av. FWHM on order
HIERARCH ESO QC ORD10 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD11 OBJ SN = 50.7773 / Av. S/N at order center
HIERARCH ESO QC ORD11 OBJ POS = 26.6439 / Av. OBJ POS at order center
HIERARCH ESO QC ORD11 OBJ FWHM = 16.3064 / Av. FWHM on order
HIERARCH ESO QC ORD11 OBJ RPLPAR = 3.1214 / Av. relative ripple amplitude
HIERARCH ESO QC ORD12 OBJ SN = 35.082 / Av. S/N at order center
HIERARCH ESO QC ORD12 OBJ POS = 26.5851 / Av. OBJ POS at order center
HIERARCH ESO QC ORD12 OBJ FWHM = 16.0662 / Av. FWHM on order
HIERARCH ESO QC ORD12 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD13 OBJ SN = 46.4856 / Av. S/N at order center
HIERARCH ESO QC ORD13 OBJ POS = 26.5267 / Av. OBJ POS at order center
HIERARCH ESO QC ORD13 OBJ FWHM = 16.0798 / Av. FWHM on order
HIERARCH ESO QC ORD13 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD14 OBJ SN = 45.0161 / Av. S/N at order center
HIERARCH ESO QC ORD14 OBJ POS = 26.4691 / Av. OBJ POS at order center
HIERARCH ESO QC ORD14 OBJ FWHM = 15.9447 / Av. FWHM on order
HIERARCH ESO QC ORD14 OBJ RPLPAR = 3.1411 / Av. relative ripple amplitude
HIERARCH ESO QC ORD15 OBJ SN = 43.2045 / Av. S/N at order center
HIERARCH ESO QC ORD15 OBJ POS = 26.4126 / Av. OBJ POS at order center
HIERARCH ESO QC ORD15 OBJ FWHM = 15.809 / Av. FWHM on order
HIERARCH ESO QC ORD15 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD16 OBJ SN = 41.508 / Av. S/N at order center
HIERARCH ESO QC ORD16 OBJ POS = 26.3576 / Av. OBJ POS at order center
HIERARCH ESO QC ORD16 OBJ FWHM = 15.7119 / Av. FWHM on order
HIERARCH ESO QC ORD16 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD17 OBJ SN = 39.8486 / Av. S/N at order center
HIERARCH ESO QC ORD17 OBJ POS = 26.3047 / Av. OBJ POS at order center
HIERARCH ESO QC ORD17 OBJ FWHM = 15.5896 / Av. FWHM on order
HIERARCH ESO QC ORD17 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC ORD18 OBJ SN = 38.529 / Av. S/N at order center
HIERARCH ESO QC ORD18 OBJ POS = 26.2546 / Av. OBJ POS at order center
HIERARCH ESO QC ORD18 OBJ FWHM = 15.4537 / Av. FWHM on order
HIERARCH ESO QC ORD18 OBJ RPLPAR = 2.3645 / Av. relative ripple amplitude
HIERARCH ESO QC ORD19 OBJ SN = 37.1907 / Av. S/N at order center
HIERARCH ESO QC ORD19 OBJ POS = 26.2081 / Av. OBJ POS at order center
HIERARCH ESO QC ORD19 OBJ FWHM = 15.3177 / Av. FWHM on order
HIERARCH ESO QC ORD19 OBJ RPLPAR = 1.0102 / Av. relative ripple amplitude
HIERARCH ESO QC ORD20 OBJ SN = 36.3011 / Av. S/N at order center
HIERARCH ESO QC ORD20 OBJ POS = 26.1662 / Av. OBJ POS at order center
HIERARCH ESO QC ORD20 OBJ FWHM = 15.3229 / Av. FWHM on order
HIERARCH ESO QC ORD20 OBJ RPLPAR = -1. / Av. relative ripple amplitude
HIERARCH ESO QC EX NORD = 20 / No. of orders extracted
HIERARCH ESO QC EX XSIZE = 4096 / Input image width (pixels)
HIERARCH ESO QC EX YSIZE = 64 / Extraction slit (pixels)
HIERARCH ESO QC VRAD BARYCOR = -28.27213 / Barycentric radial velocity correctio
HIERARCH ESO QC VRAD HELICOR = -28.265666 / Heliocentric radial velocity correct
CHECKSUM= 'WbfFXZd9WbdEWZd9' / HDU checksum updated 2015-11-16T17:00:45
DATASUM = '775678761' / data unit checksum updated 2015-11-16T17:00:45
END



 
Profile Email
 Quote
fitz
 11/20/2015 04:55PM  
AAAAA
Admin

Status: offline


Registered: 09/30/2005
Posts: 4040
The new SPTABLE package apparently only applies to some UVES data products, i.e. those distributed as tables. In your case, these are two dimensional images where each row represents a different order and the WSTART/WEND keywords define the wavelength range and the CDELT1 keyword defines the dispersion. That's all perfectly legal, unfortunately it is not a scheme that IRAF tasks understand directly. Instead, IRAF has it's own convention for specifying the WCS and you can make the data readable by adding the necessary header keywords using a script to convert the header information you do have.

For details, see "help specwcs" in IRAF and pay particular attention to Sec 5 (and 5.1) that defines the format of the keywords. You can use whatever scripting environment you like to add the keywords. I did a quick search of this site and ESO but didn't find any existing tool to do the conversion but you might find something on google.

 
Profile Email
 Quote
   
Content generated in: 0.11 seconds
New Topic Post Reply

Normal Topic Normal Topic
Sticky Topic Sticky Topic
Locked Topic Locked Topic
New Post New Post
Sticky Topic W/ New Post Sticky Topic W/ New Post
Locked Topic W/ New Post Locked Topic W/ New Post
View Anonymous Posts 
Anonymous users can post 
Filtered HTML Allowed 
Censored Content 
dog allergies remedies cialis 20 mg chilblain remedies


Privacy Policy
Terms of Use

User Functions

Login